| 783608 |
MATERIALS |
Optimization Research of Machining Parameters for Cutting GH4169 Based on Tool Vibration and Surface Roughness under High-Pressure Cooling |
2021-12-18 |
10.3390/ma14247861 |
Zhang Yali, Wu Mingyang, Liu Keke, Zhang Jianyu |
| 783607 |
MATERIALS |
A Recurrent Neural Network-Based Method for Dynamic Load Identification of Beam Structures |
2021-12-18 |
10.3390/ma14247846 |
Yang Hongji, Jiang Jinhui, Chen Guoping, Mohamed M Shadi, Lu Fan |
| 783606 |
MATERIALS |
Impact of Short-Cut SWCF Yarn on Conductivity and Electrical Heatability of Silicone–MWCNT Composites |
2021-12-18 |
10.3390/ma14247841 |
Trommer Kristin, Gnanaseelan Minoj |
| 783605 |
MATERIALS |
Effect of Deep Cryogenic Treatment on Corrosion Behavior of AISI H13 Die Steel |
2021-12-18 |
10.3390/ma14247863 |
Shinde Tarang, Pruncu Catalin, Dhokey Narendra B., Parau Anca C., Vladescu Alina |
| 783604 |
MATERIALS |
Chalcogenide Perovskites and Perovskite-Based Chalcohalide as Photoabsorbers: A Study of Their Properties, and Potential Photovoltaic Applications |
2021-12-18 |
10.3390/ma14247857 |
Adjogri Shadrack J., Meyer Edson L. |
| 783603 |
MATERIALS |
Effect of Heat Treatment on the Mechanical and Corrosion Properties of Mg–Zn–Ga Biodegradable Mg Alloys |
2021-12-18 |
10.3390/ma14247847 |
Bazhenov Viacheslav, Lyskovich Anastasia, Li Anna, Bautin Vasily, Komissarov Alexander, Koltygin Andrey, Bazlov Andrey, Tokar Alexey, Ten Denis, Mukhametshina Aigul |
| 783602 |
MATERIALS |
A Critical Appraisal of the Use and Properties of Nickel–Titanium Dental Alloys |
2021-12-18 |
10.3390/ma14247859 |
Močnik Petra, Kosec Tadeja |
| 783601 |
MATERIALS |
Study on Crack Development of Concrete Lining with Insufficient Lining Thickness Based on CZM Method |
2021-12-18 |
10.3390/ma14247862 |
Liu Jian, Zhang Xuesen, Lv Gaohang, Wang Kang, Han Bo, Xie Quanyi |
| 783600 |
MATERIALS |
Effect of Water-Based Disinfectants or Air-Drying on Dimensional Changes in a Thermoplastic Orthodontic Aligner |
2021-12-18 |
10.3390/ma14247850 |
Bresolato Davide, Volpato Andrea, Favero Lorenzo, Favero Riccardo |
| 783599 |
MATERIALS |
Production and Characterization of Austenitic Stainless Steel Cast Parts Reinforced with WC Particles Fabricated by Ex Situ Technique |
2021-12-18 |
10.3390/ma14247855 |
Moreira Aida B., Ribeiro Laura M. M., Lacerda Pedro, Pinto Ana M. P., Vieira Manuel F. |
